Polychlorinated biphenyl (118) activates osteoclasts and induces bone resorption in goldfish

To analyze the effect of polychlorinated biphenyl (PCB) 118 on fish bone metabolism, we examined osteoclastic and osteoblastic activities, as well as plasma calcium levels, in the scales of PCB (118)-injected goldfish. In addition, effect of PCB (118) on osteoclasts and osteoblasts was investigated in vitro. Immature goldfish, in which the endogenous effects of sex steroids are negligible, were used. PCB (118) was solubilized in dimethyl sulfoxide at a concentration of 10 ppm. At 1 and 2 days after PCB (118) injection (100 ng/g body weight), both osteoclastic and osteoblastic activities, and plasma calcium levels were measured. In an in vitro study, then, both osteoclastic and osteoblastic activities as well as each marker mRNA expression were examined. At 2 days, scale osteoclastic activity in PCB (118)-injected goldfish increased significantly, while osteoblastic activity did not change significantly. Corresponding to osteoclastic activity, plasma calcium levels increased significantly at 2 days after PCB (118) administration. Osteoclastic activation also occurred in the marker enzyme activities and mRNA expressions in vitro. Thus, we conclude that PCB (118) disrupts bone metabolism in goldfish both in vivo and in vitro experiments.     

Comparison of different disinfection processes in the effective removal of antibiotic-resistant bacteria and genes

This study compared three different disinfection processes(chlorination, E-beam, and ozone) and the efficacy of three oxidants(H2O2, S2O-8, and peroxymonosulfate(MPS)) in removing antibiotic resistant bacteria(ARB) and antibiotic resistance genes(ARGs) in a synthetic wastewater. More than30 mg/L of chlorine was needed to remove over 90% of ARB and ARG. For the E-beam method, only1 dose(kGy) was needed to remove ARB and ARG, and ozone could reduce ARB and ARG by more than 90% even at 3 mg/L ozone concentration. In the ozone process, CT values(concentration × time)were compared for ozone alone and combined with different catalysts based on the 2-log removal of ARB and ARG. Ozone treatment yielded a value of 31 and 33(mg·min)/L for ARB and ARGs respectively. On the other hand, ozone with persulfate yielded 15.9 and 18.5(mg·min)/L while ozone with monopersulfate yielded a value of 12 and 14.5(mg·min)/L. This implies that the addition of these catalysts significantly reduces the contact time to achieve a 2-log removal, thus enhancing the process in terms of its kinetics.     

Characteristics of Asian dust transport based on synoptic meteorological analysis over Korea

Classification of synoptic patterns and their correlation with dust events over East Asia were performed by means of cluster analysis. The average linkage and K-means clustering techniques were used to identify two major weather types during Asian dust events (ADEs; total 26 ADEs with 47 dusty days) of six spring seasons from 1996 to 2001. The first weather type mainly influenced neighboring Asian countries and frequently occurred with ADEs (approximately 23% of ADE cases). It mostly occurred under a surface high (low)-pressure system over the west (east) of the Korean peninsula coupled with an upper-level trough and cutoff low passage over the center of the Korean peninsula. It showed strong advection in the middle/ upper troposphere with both a high aerosol index and enhanced coarse particulate matter (PM) loading over Korea. In contrast, the second weather type was mostly associated with long distance or continental-scale transport and occurred less frequently with ADEs (approximately 15%). It appeared with an upper-level trough and a cutoff low vertically connected with a surface low system that was formed by a strong cyclonic vortex over the north of the Korean peninsula. There were weak advection, low aerosol index, and low coarse PM concentration over the Korean peninsula during the second weather type. In addition, it was found to be mostly associated with the trans-Pacific transport of Asian dust to the western coast of North America.     

Development of new footwear sole surface pattern for prevention of slip-related falls

In this study, a new rubber surface pattern for a footwear sole was developed to prevent slip-related falls. This pattern shows a high static coefficient of friction (SCOF) and a high dynamic coefficient of friction (DCOF) when sliding against a liquid contaminated surface. A hybrid rubber block, in which a rubber block with a rough surface (Ra = 30.4 μm) was sandwiched between two rubber blocks with smooth surfaces (Ra = 0.98 μm), was prepared. The ratio of the rough surface area to the whole rubber block surface area r was 0%, 30%, 50%, 80%, and 100%. The coefficient of friction of the rubber blocks was measured when sliding against a stainless steel plate with Ra of 0.09 μm contaminated with a 90% aqueous solution of glycerol. While the SCOF increased with an increase of the rough surface area ratio r, the DCOF during steady-state sliding decreased with an increase of the rough surface area ratio r. The rough surface area ratio of 50% achieved a SCOF value around 0.5 or more and a DCOF value greater than 0.5. Furthermore, the difference in the value of the SCOF and DCOF was the smallest for the rubber block with r of 50%. The results indicated that the rubber block with r of 50% would be applicable to a footwear sole surface pattern to prevent slip and fall accidents on contaminated surfaces.     

Growth and Nitrogen Availability of Red Pine Seedlings under High Nitrogen Load and Elevated Ozone

To evaluate the effect of increasing nitrogen (N) deposition and tropospheric ozone (O₃) concentrations on N-saturated forest ecosystems, we investigated the response of Japanese red pine (Pinus densiflora), an N-saturation sensitive tree species, to increasing N load under elevated O₃ concentrations. One-year-old seedlings of red pine were treated with three levels of N supply (0, 50 and 100 mg N L^-1 fresh soil volume) under two levels of atmospheric O₃ concentration (< 5 and 60 ppb) for two growing seasons. Nitrogen treatment did not stimulate dry matter production of the seedlings. Growth inhibition was observed in the highest N treatment under low O₃ and in the two higher N treatments under elevated O₃. Irrespective of the O₃ concentration, increasing N supply negatively affected root growth and mycorrhizal development in fine roots, resulting in a reduction in P and Mg uptake from the soil. Net photosynthetic rate was significantly reduced by both the highest N treatment under low O₃ and the two higher N treatments under elevated O₃, together with decreased N-availability to Rubisco. Nitrogen assimilated from NO₃ ^- to amino acid in the needles was not affected by the treatments. However, needle protein concentration was reduced by the highest N-treatment under low O₃ and by the two higher N-treatments under elevated O₃. These results suggest that elevated O₃ potentially disturbs the N-availability in the form of protein including Rubisco, and may advance the negative effects of excessive N-deposition on N-sensitive plant species in N-saturated forests.     

Sensitive monitoring of iodine species in sea water using capillary electrophoresis: vertical profiles of dissolved iodine in the Pacific Ocean

Using a novel high-sensitivity capillary electrophoretic method, vertical distributions of iodate, iodide, total inorganic iodine, dissolved organic iodine and total iodine in the North Pacific Ocean (0-5500 m) were determined without any sample pre-treatment other than UV irradiation before total iodine analysis. An extensive set of data demonstrated that the iodine behaviour in the ocean water collected during a cruise in the North Pacific Ocean in February-March 2003 was not conservative but correlated with variations in concentrations of dissolved oxygen and nutrient elements such as silicon, nitrogen and phosphorus. This suggests that the vertical distribution of iodine is associated with biological activities. The dissolved organic iodine was found in the euphotic zone in accord with observations elsewhere in the oceans. The vertical profile of dissolved organic iodine also appears to be related to biogeochemical activity. The concentrations of all measured iodine species vary noticeably above 1000 m but only minor latitudinal changes occur below 1000 m and slight vertical alterations can be observed below 2400 m. These findings are thought to reflect the stratification of nutrients and iodine species with different biological activities in the water column.     

Hydrothermal treatment of MSWI bottom ash forming acid-resistant material

To recycle municipal solid waste incinerator (MSWI) bottom ash, synthesis of hydrothermal minerals from bottom ash was performed to stabilize heavy metals. MSWI bottom ash was mixed with SiO(2), Al(OH)(3), and Mg(OH)(2) so its chemical composition was similar to that of hydrothermal clay minerals. These solid specimens were mixed with water at a liquid/solid ratio of 5. The reaction temperature was 200 degrees C, and reactions were performed for 24-240h. Generation of kaolinite/smectite mixed-layer clay mineral was found in the samples after the reaction of the mixture of bottom ash, SiO(2), and Mg(OH)(2). Calcium silicate hydrate minerals such as tobermorite and xonotlite were also generated. X-ray powder diffraction suggested the presence of amorphous materials. Leaching tests at various pHs revealed that the concentration of heavy metals in the leachates from MSWI bottom ash hydrothermally treated with SiO(2) and Mg(OH)(2) was lower than that in leachates from non-treated bottom ash, especially under acid conditions. Hydrothermal treatment with modification of chemical composition may have potential for the recycling of MSWI bottom ash.